 Posted 7/21/2008 3:14:37 PM
|
|
|
|
I want to get into infared photography. Not wanting to modify my camera's sensor, just looking to get a good filter. Any suggestions? I was looking into the Hoya R72. Are there any other things i will need to get that will help? Other filters that might work better? Any advice would be great. Thanks!
Leah Keese, Photographer, Dreamer, Obnoxious Redhead.....
"No one wants advice - only corroboration"
~John Steinbeck
|
|
|
Posted 7/21/2008 3:51:59 PM
|
|
|
|
Nikon cameras are very good and I don't know very much about them. But, I'll bet your D300 has an IR blocking filter covering the sensor, like most modern DSLRs. You can remove it or have someone remove it. It might void your warranty.
Maybe some Nikon folks can offer some advice.
 My Top 24
|
|
|
Posted 8/2/2008 2:20:55 PM
|
|
|
|
All I can say to that is: use film.
Most digital cameras have several IR blockers integrated, and those specifically made for IR don't have a high resolution (like computer screen worth).
If you have a problem with reality, quit taking photos and take up painting
|
|
|
Posted 8/2/2008 2:30:39 PM
|
|
|
|
| Hi Leah, . Heres a snip fom Wikipedia. . Digital camera sensors are inherently sensitive to infrared light, which would interfere with the normal photography by confusing the autofocus calculations or softening the image (because infrared light is focused differently than visible light), or oversaturating the red channel. Also, some clothing is transparent in the infrared, leading to unintended (at least to the manufacturer) uses of video cameras.[4] Thus, to improve image quality and protect privacy, many digital cameras employ infrared blockers[5]. Depending on your subject matter, infrared photography may not be practical with these cameras because the exposure times become overly long, often in the range of 30 seconds, creating noise and motion blur in the final image. However, for some subject matter the long exposure does not matter or the motion blur effects actually add to the image. Some lenses will also show a 'hot spot' in the centre of the image as their coatings are optimised for visible light and not for IR. An alternative method of digital SLR infrared photography is to remove the infrared blocker in front of the CCD and replace it with a filter that removes visible light. This filter is behind the mirror, so the camera can be used normally - handheld, normal shutter speeds, normal composition through the viewfinder, and focus, all work like a normal camera. Metering works but is not always accurate because of the difference between visible and infrared reflection.[6] When the IR blocker is removed, many lenses which did display a hotspot cease to do so, and become perfectly usable for infrared photography. Additionally, because the red, green and blue micro-filters remain and have transmissions not only in their respective color but also in the infrared, enhanced infrared color may be recorded[7]. . Hope this helps . cheers . Ron
Amateurs worry about sharpness,
Professionals worry about money,
Photographers worry about light.
|
|
|
|
